FIGURE - TM-10-5410-228-100020
Chapter 1. INTRODUCTION - TM-10-5410-228-100021
PREPARATION FOR STORAGE AND SHIPMENT.
SAFETY CARE AND HANDLING. - TM-10-5410-228-100023
REFERENCE INFORMATION
REFERENCE INFORMATION - Continued.
Section II. EQUIPMENT DESCRIPTION AND DATA - TM-10-5410-228-100026
Figure 1-1. ECV Modification (Sheet 1 of 2) - TM-10-5410-228-100027
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - TM-10-5410-228-100028
LMS Modification - TM-10-5410-228-100029
Figure 1-2. LMS Modification (Sheet 1 of 2) - TM-10-5410-228-100030
Figure 1-2. LMS Modification (Sheet 2 of 2) - TM-10-5410-228-100031
Electrical System - TM-10-5410-228-100032
Figure 1-3. Electrical System - TM-10-5410-228-100033
Figure 1-4. ECU - TM-10-5410-228-100034
Figure 1-5. TQG and HMT - TM-10-5410-228-100035
Recirculation Filter - TM-10-5410-228-100036
Figure 1-6. ABS - TM-10-5410-228-100037
Figure 1-7. Recirculation Filter - TM-10-5410-228-100038
EQUIPMENT DATA. - TM-10-5410-228-100039
Section III. PRINCIPLES OF OPERATION - TM-10-5410-228-100040
Environmental Control
Section IV. MODES OF OPERATION
Section V. REMOTE RADIO OPERATION
THEORY OF OPERATION.
Figure 1-10. HRCRD Controls
OPERATION.
Figure 1-13. HRCRD Cable Connections
Figure 1-14. RRA Mounted on LMS Rear Wall Exterior
Radio Operation in Static Mode.
Chapter 2. OPERATING INSTRUCTIONS - TM-10-5410-228-100051
INVERTER 1A4A13.
CONVERTER 1A4A12.
REAR CONTROL PANEL 1A4A4.
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100056
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100057
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100058
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100059
FORWARD LIGHT BOX ASSEMBLY 1A4A5.
CONTROL BOX ASSEMBLY 1A4A18.
VEHICLE CONTROL BOX 1A4A8.
EXPANDED CAPACITY VEHICLE (ECV) CAB CONTROLS 1A4A17.
TACHOMETER.
RECEPTACLE PANEL 1A4A10.
POWER PANEL 1A4A9.
PRESSURE RELIEF VALVES.
ENVIRONMENTAL CONTROL UNIT (ECU) INDICATORS.
HYDRAULIC SHUT-OFF VALVES.
PRESSURE GAGE ASSEMBLY.
Section II. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - TM-10-5410-228-100071
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Figure 2-1. PMCS Location Diagram (Sheet 1 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 2 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 3 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 4 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 5 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 6 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 7 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 8 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 9 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 10 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 11 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 12 of 12)
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100086
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100087
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100088
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100089
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100090
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100091
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100092
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100093
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100094
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100095
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100096
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100097
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100098
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100099
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100100
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100101
DECALS AND INSTRUCTION PLATES.
Figure 2-2. Decals and Instruction Plates (Sheet 2 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 3 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 4 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 5 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 6 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 7 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 8 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 9 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 10 of 10)
Section III. OPERATION UNDER USUAL CONDITIONS
LMS Crew Tasks - TM-10-5410-228-100113
Mobile Operation Switchover From Non-NBC To NBC Conditions
Mobile Mode Shut Down Procedure.
Expanded Capacity Vehicle (ECV) and High Mobility Trailer (HMT) Setup
Deployment Using Internal ECV Power.
Figure 2-5. Positioning Ground Cloth
LMS Crew Tasks - TM-10-5410-228-100119
Figure 2-6. ABS Deployment
Figure 2-7. Internal Power Control Settings
Deployment Using Internal (ECV) Power - Continued.
Figure 2-8. Rear Control Panel Using Internal Power - Non-NBC Conditions
Figure 2-9. Power Cable and Ground Lead
Deployment Using External (10 kW TQG) Power.
Figure 2-10. Rear Control Panel Settings Using External Power
ABS Setup Procedures.
Figure 2-11. Monitoring ABS Inflation
Figure 2-12. ABS Inflation
Figure 2-13. Air Beam Inflation
Figure 2-14. Installing Inner TALP Door
ABS Setup Procedures - Continued. - TM-10-5410-228-100132
Figure 2-15. Installing Inner Ambulatory Airlock Door
ABS Setup Procedures - Continued. - TM-10-5410-228-100134
Figure 2-16. Airlock Pressure Gage Installation
Cab Crew Tasks - TM-10-5410-228-100136
Figure 2-18. Installing Outer TALP Airlock Door
Figure 2-19. TALP Airlock Door Rails Installation
Figure 2-20. Installing Outer Ambulatory Airlock Door
Figure 2-21. Inflating ABS
Direct Complexing Shelter (DCS).
LMS Crew Tasks - TM-10-5410-228-100142
Figure 2-23. DCS Setup
Direct Complexing Forward Surgical Team (FST) and Level II Medical Treatment Facility (MTF).
MTF Setup.
FST and MTF Combined Setup
Static Operation With Internal Power - Switchover From Non-NBC To NBC Conditions.
Static Operation With Internal Power - Switchover From Non-NBC To NBC Conditions. (Cont)
Figure 2-25. Rear Control Panel Settings, Internal Power - Switch Over From Non-NBC to NBC Conditions
Static Operation With External Power - Switchover From Non-NBC To NBC Conditions.
LMS Crew Tasks - TM-10-5410-228-100151
Figure 2-26. Rear Control Panel Settings Using External Power - NBC Conditions
Striking and Shut Down Procedures.
Figure 2-27. Ambulatory Airlock Door and TALP Airlock Door Removal
Figure 2-28. Rear Control Panel Settings Using Internal Power During Striking
CBPS Striking Procedures - TM-10-5410-228-100156
Figure 2-29. Deflating the ABS
CBPS Striking Procedures - Continued. - TM-10-5410-228-100158
Figure 2-30. Folding the ABS
Figure 2-31. Packing the ABS
CBPS Striking Procedures - Continued. - TM-10-5410-228-100161
Static Mode Shut Down Procedure - Internal Power.
Figure 2-32. Static Mode Shut Down Settings
High Mobility Trailer (HMT) Hookup.
Figure 2-33. HMT Hookup
Section IV. OPERATION UNDER UNUSUAL CONDITIONS
Mobile Operation Switchover From NBC To Non-NBC Conditions.
Figure 2-34. Rear Control Panel Settings in Mobile Mode - NBC Conditions
Static Operation Under NBC Conditions.
Deployment Using Internal (ECV) Power.
Figure 2-35. Internal Power Control Settings - NBC Conditions
Deployment Using External (10 kW TQG) Power
Figure 2-36. External Power Control Setting - NBC Conditions
Air Beam Shelter (ABS) Setup Procedures Under NBC Conditions.
Figure 2-37. Monitoring ABS Inflation
Figure 2-38. ABS Inflation
Figure 2-39. Air Beam Inflation Using Internal Power
Figure 2-40. Installing Inner TALP Airlock Door
LMS Crew Tasks - TM-10-5410-228-100179
Figure 2-41. Installing Inner Ambulatory Airlock Door
Figure 2-42. Airlock Pressure Gage Installation
Air Beam Shelter (ABS) Setup Procedures Under NBC Conditions - Continued.
Figure 2-43. ABS Lights and NBC Recirculation Filter Installation
Cab Crew Tasks - TM-10-5410-228-100184
Figure 2-44. Installing Outer TALP Airlock Door
Figure 2-45. TALP Airlock Door Rails Installation - NBC Conditions
Figure 2-46. Installing Outer Ambulatory Airlock Door
Figure 2-47. Inflating ABS
Direct Complexing Shelter (DCS) Under NBC Conditions.
Figure 2-48. Positioning Ground Cloths for DCS
Figure 2-49. DCS Setup
Static Operation Switchover From NBC To Non-NBC Conditions.
Figure 2-50. Rear Control Panel Settings Switchover
Striking Procedures Under NBC Conditions.
Figure 2-51. Ambulatory Airlock Door and TALP Airlock Door Removal
CBPS Striking Procedures - TM-10-5410-228-100196
Figure 2-52. Rear Control Panel Striking Settings - NBC Conditions
Cab Crew Tasks - TM-10-5410-228-100198
Figure 2-53. Deflating the ABS
CBPS Striking Procedures - Continued. - TM-10-5410-228-100200
Figure 2-54. Folding the ABS
Figure 2-55. Packing the ABS
HMT Hookup. - TM-10-5410-228-100203
HMT Hookup. - TM-10-5410-228-100203_copy1
Figure 2-56. HMT Hookup
OPERATION IN HEAVY SNOW.
Figure 2-57. ABS in Unusual Conditions
OPERATION IN WET CLIMATE.
OPERATION AT DIFFERENT ALTITUDES.
Figure 2-58. ABS Insulation Panels
OPERATION WITH FAILED AIR BEAM.
Chapter 3. OPERATOR MAINTENANCE INSTRUCTIONS
LUBRICATION INTERVALS.
Section II. OPERATOR TROUBLESHOOTING PROCEDURES - TM-10-5410-228-100213
Table 3-1. Rear Control Panel Alarm Indicators
Table 3-1. Rear Control Panel Alarm Indicators - Continued
OPERATOR TROUBLESHOOTING.
NO POWER (ECV SHUTS DOWN OR DOESN'T START), INTERNAL POWER, STATIC OR MOBILE MODE
NO POWER (ECV SHUTS DOWN OR DOESN'T START), INTERNAL POWER, STATIC OR MOBILE MODE (cont)
NO AIR FLOW, INTERNAL POWER
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL", OR "VENT", INTERNAL POWER, MOBILE MODE.
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL", OR "VENT", INTERNAL POWER, MOBILE MODE. (cont)
NO OR LOW NBC PRESSURE, MOBILE MODE.
NO OR LOW NBC PRESSURE, MOBILE MODE - Continued.
NO LIGHTS ON FORWARD LIGHT BOX ASSEMBLY, LIGHT BOX, AND MAP LIGHTS, INTERNAL POWER, MOBILE OR STATIC MODE.
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL" OR "VENT", INTERNAL OR EXTERNAL POWER, STATIC MODE.
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL" OR "VENT", INTERNAL OR EXTERNAL POWER, STATIC MODE. (cont) - TM-10-5410-228-100226
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL" OR "VENT", INTERNAL OR EXTERNAL POWER, STATIC MODE. (cont) - TM-10-5410-228-100227
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE.
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE - Continued. - TM-10-5410-228-100229
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE - Continued. - TM-10-5410-228-100230
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE - Continued. - TM-10-5410-228-100231
NO LIGHTS IN ABS, INTERNAL POWER, STATIC MODE.
NO LIGHTS IN ABS, INTERNAL POWER, STATIC MODE - Continued.
NO HOT AIR, INTERNAL POWER, MOBILE OR STATIC MODE (NO TQG SUPPLEMENTAL).
NO HOT AIR, INTERNAL POWER, MOBILE OR STATIC MODE (NO TQG SUPPLEMENTAL). (cont)
LOW HEAT WITH TQG SUPPLEMENTAL, INTERNAL POWER, STATIC MODE.
LOW HEAT WITH TQG SUPPLEMENTAL, INTERNAL POWER, STATIC MODE - Continued.
NO AIR CONDITIONING, INTERNAL POWER, STATIC MODE.
NO AIR CONDITIONING, INTERNAL POWER, STATIC MODE - Continued.
RIB PRESSURE LOW, AIR BEAMS DO NOT INFLATE WHEN RIB FAN SWITCH IS PRESSED, INTERNAL POWER, STATIC MODE.
RIB PRESSURE LOW, AIR BEAMS DO NOT INFLATE WHEN RIB FAN SWITCH IS PRESSED, INTERNAL POWER, STATIC MODE. (cont)
NO POWER TO LMS, EXTERNAL POWER.
NO AIRFLOW INSIDE OF ABS, EXTERNAL POWER.
NO AIR FLOW INSIDE OF ABS, EXTERNAL POWER - Continued.
NO AIR CONDITIONING, EXTERNAL POWER.
NO AIR CONDITIONING, EXTERNAL POWER - Continued.
NO HOT AIR, EXTERNAL POWER.
NO LIGHTING IN ABS, EXTERNAL POWER.
NO LIGHTING IN ABS, EXTERNAL POWER - Continued. - TM-10-5410-228-100249
NO LIGHTING IN ABS, EXTERNAL POWER - Continued. - TM-10-5410-228-100250
NO POWER TO SYSTEM - ECV RUNNING, INTERNAL POWER, STATIC OR MOBILE MODE.
Table 3-2. Circuit Breaker and Switch Configuration for Mobile Mode
Table 3-4. Circuit Breaker and Switch Configuration for Static Mode, Internal Power, HEAT, Non-NBC
Table 3-6. Circuit Breaker and Switch Configuration for Static Mode, Internal Power, HEAT, NBC
Table 3-8. Circuit Breaker and Switch Configuration for Static Mode, External Power, HEAT, Non-NBC
Section III. OPERATOR MAINTENANCE PROCEDURES
Figure 3-1. Forward Light Box Assembly Lamp Replacement
Rear Light Box Assembly Lamp Replacement.
Pushbutton Switch Assembly Lamp Replacement.
ENVIRONMENTAL CONTROL UNIT (ECU). - TM-10-5410-228-100260
Filter Cleaning.
Drain Hydraulic Overflow Container.
Fill Hydraulic Reservoir.
Figure 3-7. Fill Hydraulic Reservoir
NBC Filter Replacement.
Figure 3-8. NBC Filter Replacement
AIR BEAM SHELTER (ABS). - TM-10-5410-228-100267
Fabric Repair
Figure 3-9. Fabric Repair (Sheet 1 of 2)
Figure 3-9. Fabric Repair (Sheet 2 of 2)
ABS Line Replacement.
Figure 3-10. ABS Line Replacement
ABS Light Fuse Replacement.
ABS Light Lamp Replacement.
Chapter 4. ENTRY AND EXIT PROCEDURES FOR THE CBPS
Section II. EQUIPMENT AND SUPPLIES
Section III. ENTRY AND EXIT PROCEDURES
Section IV. MONITORING PROCEDURES WITH CAM/ICAM
MONITORING AMBULATORY PATIENTS IN AIRLOCK.
Appendix a. REFERENCES - TM-10-5410-228-100281
TECHNICAL BULLETIN/MANUALS
Appendix B. COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS
Section II. COMPONENTS OF END ITEM LIST
Section II. COMPONENTS OF END ITEM LIST - Continued
Figure B-1. Components of End Item (Sheet 1 of 4)
Figure B-1. Components of End Item (Sheet 2 of 4)
Figure B-1. Components of End Item (Sheet 3 of 4)
Figure B-1. Components of End Item (Sheet 4 of 4)
Section III. BASIC ISSUE ITEMS - TM-10-5410-228-100290
Figure B-2. Basic Issue Items
Appendix C. ADDITIONAL AUTHORIZATION LIST - TM-10-5410-228-100293
Appendix D. EXPENDABLE AND DURABLE ITEM LIST
Section II. EXPENDABLE AND DURABLE ITEM LIST
Appendix E. LOAD PLAN
HIGH MOBILITY TRAILER (HMT) LOADING
Figure E-1. HMT Load Plan (Sheet 1 of 5)
Figure E-1. HMT Load Plan (Sheet 2 of 5)
Figure E-1. HMT Load Plan (Sheet 3 of 5)
Figure E-1. HMT Load Plan (Sheet 4 of 5)
Figure E-1. HMT Load Plan (Sheet 5 of 5)
LIGHTWEIGHT MULTIPURPOSE SHELTER (LMS) LOADING.
Table E-1. FST Load Plans
FORWARD SURGICAL TEAM (FST) AND LEVEL II MEDICAL TREATMENT FACILITY (MTF) LOAD PLANS
Figure E-2. FST, LMS - OR (Sheet 2 of 2)
Figure E-3. FST, HMT - OR (Sheet 2 of 3)
Figure E-4. FST, LMS - Post Op
Figure E-5. FST, HMT - Post Op (Sheet 1 of 3)
Figure E-5. FST, HMT - Post Op (Sheet 2 of 3)
Figure E-6. FST, LMS - Pre Op (Sheet 1 of 2)
Figure E-6. FST, LMS - Pre Op (Sheet 2 of 2)
Figure E-7. FST, HMT - Pre Op (Sheet 1 of 4)
Figure E-7. FST, HMT - Pre Op (Sheet 2 of 4)
Figure E-7. FST, HMT - Pre Op (Sheet 3 of 4)
Figure E-7. FST, HMT - Pre Op (Sheet 4 of 4)
Table E-2. MTF Load Plans- Dental
Figure E-8. MTF, LMS - Dental (Sheet 1 of 2)
Figure E-9. MTF,HMT Dental (Sheet 1 of 5).
Figure E-9. MTF, HMT Dental (Sheet 3 of 5).
Figure E-9. MTF, HMT Dental (Sheet 5 of 5).
Table E-3. MTF Load Plans- EMT
Figure E-10. LMS, MTF EMT (Sheet 1 of 2).
Figure E-10. LMS, MTF EMT (Sheet 2 of 2).
Figure E-11. HMT, MTF EMT (Sheet 2 of 4).
Figure E-11. HMT, MTF EMT (Sheet 3 of 4).
Table E-4. MTF Load Plans- Patient Hold
Figure E-12. LMS, MTF Patient Hold.
Figure E-13. HMT, MTF Patient Hold (Sheet 2 of 3).
Table E-5. MTF Load Plans - X-Ray
Figure E-15. HMT, MTF X-Ray (Sheet 1 of 2).
Appendix F. CHEMICAL BIOLOGICAL PROTECTIVE SHELTER (CBPS) SYSTEM DECONTAMINATION (DECON)
SEQUENCE OF OPERATIONAL DECON PROCEDURES.
SEQUENCE OF THOROUGH DECON PROCEDURES.
Figure F-1. Fixed-Site CBPS Decon Configuration
Table F-1. CBPS Post-Through Decon Replacement Items
Table F-1. CBPS Post-Through Decon Replacement Items - Continued
Appendix G. CBPS PERFORMANCE MEASURES
CBPS Performance Measures (LMS Crew)
TM-10-5410-228-10 Chemical Biologiocal Protective Shelter (CBPS) System NSN 5410-01-441-8054 (Green) (EIC:5ZT) NSN 5410-01-482-4633 (Tan) Manual
Chapter 1. INTRODUCTION - TM-10-5410-228-100021
PREPARATION FOR STORAGE AND SHIPMENT.
SAFETY CARE AND HANDLING. - TM-10-5410-228-100023
REFERENCE INFORMATION
REFERENCE INFORMATION - Continued.
Section II. EQUIPMENT DESCRIPTION AND DATA - TM-10-5410-228-100026
Figure 1-1. ECV Modification (Sheet 1 of 2) - TM-10-5410-228-100027
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - TM-10-5410-228-100028
LMS Modification - TM-10-5410-228-100029
Figure 1-2. LMS Modification (Sheet 1 of 2) - TM-10-5410-228-100030
Figure 1-2. LMS Modification (Sheet 2 of 2) - TM-10-5410-228-100031
Electrical System - TM-10-5410-228-100032
Figure 1-3. Electrical System - TM-10-5410-228-100033
Figure 1-4. ECU - TM-10-5410-228-100034
Figure 1-5. TQG and HMT - TM-10-5410-228-100035
Recirculation Filter - TM-10-5410-228-100036
Figure 1-6. ABS - TM-10-5410-228-100037
Figure 1-7. Recirculation Filter - TM-10-5410-228-100038
EQUIPMENT DATA. - TM-10-5410-228-100039
Section III. PRINCIPLES OF OPERATION - TM-10-5410-228-100040
Environmental Control
Section IV. MODES OF OPERATION
Section V. REMOTE RADIO OPERATION
THEORY OF OPERATION.
Figure 1-10. HRCRD Controls
OPERATION.
Figure 1-13. HRCRD Cable Connections
Figure 1-14. RRA Mounted on LMS Rear Wall Exterior
Radio Operation in Static Mode.
Chapter 2. OPERATING INSTRUCTIONS - TM-10-5410-228-100051
INVERTER 1A4A13.
CONVERTER 1A4A12.
REAR CONTROL PANEL 1A4A4.
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100056
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100057
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100058
REAR CONTROL PANEL 1A4A4 - Continued. - TM-10-5410-228-100059
FORWARD LIGHT BOX ASSEMBLY 1A4A5.
CONTROL BOX ASSEMBLY 1A4A18.
VEHICLE CONTROL BOX 1A4A8.
EXPANDED CAPACITY VEHICLE (ECV) CAB CONTROLS 1A4A17.
TACHOMETER.
RECEPTACLE PANEL 1A4A10.
POWER PANEL 1A4A9.
PRESSURE RELIEF VALVES.
ENVIRONMENTAL CONTROL UNIT (ECU) INDICATORS.
HYDRAULIC SHUT-OFF VALVES.
PRESSURE GAGE ASSEMBLY.
Section II. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - TM-10-5410-228-100071
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Figure 2-1. PMCS Location Diagram (Sheet 1 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 2 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 3 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 4 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 5 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 6 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 7 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 8 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 9 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 10 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 11 of 12)
Figure 2-1. PMCS Location Diagram (Sheet 12 of 12)
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100086
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100087
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100088
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100089
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100090
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100091
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100092
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100093
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100094
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100095
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100096
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100097
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100098
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100099
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100100
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued - TM-10-5410-228-100101
DECALS AND INSTRUCTION PLATES.
Figure 2-2. Decals and Instruction Plates (Sheet 2 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 3 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 4 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 5 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 6 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 7 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 8 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 9 of 10)
Figure 2-2. Decals and Instruction Plates (Sheet 10 of 10)
Section III. OPERATION UNDER USUAL CONDITIONS
LMS Crew Tasks - TM-10-5410-228-100113
Mobile Operation Switchover From Non-NBC To NBC Conditions
Mobile Mode Shut Down Procedure.
Expanded Capacity Vehicle (ECV) and High Mobility Trailer (HMT) Setup
Deployment Using Internal ECV Power.
Figure 2-5. Positioning Ground Cloth
LMS Crew Tasks - TM-10-5410-228-100119
Figure 2-6. ABS Deployment
Figure 2-7. Internal Power Control Settings
Deployment Using Internal (ECV) Power - Continued.
Figure 2-8. Rear Control Panel Using Internal Power - Non-NBC Conditions
Figure 2-9. Power Cable and Ground Lead
Deployment Using External (10 kW TQG) Power.
Figure 2-10. Rear Control Panel Settings Using External Power
ABS Setup Procedures.
Figure 2-11. Monitoring ABS Inflation
Figure 2-12. ABS Inflation
Figure 2-13. Air Beam Inflation
Figure 2-14. Installing Inner TALP Door
ABS Setup Procedures - Continued. - TM-10-5410-228-100132
Figure 2-15. Installing Inner Ambulatory Airlock Door
ABS Setup Procedures - Continued. - TM-10-5410-228-100134
Figure 2-16. Airlock Pressure Gage Installation
Cab Crew Tasks - TM-10-5410-228-100136
Figure 2-18. Installing Outer TALP Airlock Door
Figure 2-19. TALP Airlock Door Rails Installation
Figure 2-20. Installing Outer Ambulatory Airlock Door
Figure 2-21. Inflating ABS
Direct Complexing Shelter (DCS).
LMS Crew Tasks - TM-10-5410-228-100142
Figure 2-23. DCS Setup
Direct Complexing Forward Surgical Team (FST) and Level II Medical Treatment Facility (MTF).
MTF Setup.
FST and MTF Combined Setup
Static Operation With Internal Power - Switchover From Non-NBC To NBC Conditions.
Static Operation With Internal Power - Switchover From Non-NBC To NBC Conditions. (Cont)
Figure 2-25. Rear Control Panel Settings, Internal Power - Switch Over From Non-NBC to NBC Conditions
Static Operation With External Power - Switchover From Non-NBC To NBC Conditions.
LMS Crew Tasks - TM-10-5410-228-100151
Figure 2-26. Rear Control Panel Settings Using External Power - NBC Conditions
Striking and Shut Down Procedures.
Figure 2-27. Ambulatory Airlock Door and TALP Airlock Door Removal
Figure 2-28. Rear Control Panel Settings Using Internal Power During Striking
CBPS Striking Procedures - TM-10-5410-228-100156
Figure 2-29. Deflating the ABS
CBPS Striking Procedures - Continued. - TM-10-5410-228-100158
Figure 2-30. Folding the ABS
Figure 2-31. Packing the ABS
CBPS Striking Procedures - Continued. - TM-10-5410-228-100161
Static Mode Shut Down Procedure - Internal Power.
Figure 2-32. Static Mode Shut Down Settings
High Mobility Trailer (HMT) Hookup.
Figure 2-33. HMT Hookup
Section IV. OPERATION UNDER UNUSUAL CONDITIONS
Mobile Operation Switchover From NBC To Non-NBC Conditions.
Figure 2-34. Rear Control Panel Settings in Mobile Mode - NBC Conditions
Static Operation Under NBC Conditions.
Deployment Using Internal (ECV) Power.
Figure 2-35. Internal Power Control Settings - NBC Conditions
Deployment Using External (10 kW TQG) Power
Figure 2-36. External Power Control Setting - NBC Conditions
Air Beam Shelter (ABS) Setup Procedures Under NBC Conditions.
Figure 2-37. Monitoring ABS Inflation
Figure 2-38. ABS Inflation
Figure 2-39. Air Beam Inflation Using Internal Power
Figure 2-40. Installing Inner TALP Airlock Door
LMS Crew Tasks - TM-10-5410-228-100179
Figure 2-41. Installing Inner Ambulatory Airlock Door
Figure 2-42. Airlock Pressure Gage Installation
Air Beam Shelter (ABS) Setup Procedures Under NBC Conditions - Continued.
Figure 2-43. ABS Lights and NBC Recirculation Filter Installation
Cab Crew Tasks - TM-10-5410-228-100184
Figure 2-44. Installing Outer TALP Airlock Door
Figure 2-45. TALP Airlock Door Rails Installation - NBC Conditions
Figure 2-46. Installing Outer Ambulatory Airlock Door
Figure 2-47. Inflating ABS
Direct Complexing Shelter (DCS) Under NBC Conditions.
Figure 2-48. Positioning Ground Cloths for DCS
Figure 2-49. DCS Setup
Static Operation Switchover From NBC To Non-NBC Conditions.
Figure 2-50. Rear Control Panel Settings Switchover
Striking Procedures Under NBC Conditions.
Figure 2-51. Ambulatory Airlock Door and TALP Airlock Door Removal
CBPS Striking Procedures - TM-10-5410-228-100196
Figure 2-52. Rear Control Panel Striking Settings - NBC Conditions
Cab Crew Tasks - TM-10-5410-228-100198
Figure 2-53. Deflating the ABS
CBPS Striking Procedures - Continued. - TM-10-5410-228-100200
Figure 2-54. Folding the ABS
Figure 2-55. Packing the ABS
HMT Hookup. - TM-10-5410-228-100203
HMT Hookup. - TM-10-5410-228-100203_copy1
Figure 2-56. HMT Hookup
OPERATION IN HEAVY SNOW.
Figure 2-57. ABS in Unusual Conditions
OPERATION IN WET CLIMATE.
OPERATION AT DIFFERENT ALTITUDES.
Figure 2-58. ABS Insulation Panels
OPERATION WITH FAILED AIR BEAM.
Chapter 3. OPERATOR MAINTENANCE INSTRUCTIONS
LUBRICATION INTERVALS.
Section II. OPERATOR TROUBLESHOOTING PROCEDURES - TM-10-5410-228-100213
Table 3-1. Rear Control Panel Alarm Indicators
Table 3-1. Rear Control Panel Alarm Indicators - Continued
OPERATOR TROUBLESHOOTING.
NO POWER (ECV SHUTS DOWN OR DOESN'T START), INTERNAL POWER, STATIC OR MOBILE MODE
NO POWER (ECV SHUTS DOWN OR DOESN'T START), INTERNAL POWER, STATIC OR MOBILE MODE (cont)
NO AIR FLOW, INTERNAL POWER
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL", OR "VENT", INTERNAL POWER, MOBILE MODE.
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL", OR "VENT", INTERNAL POWER, MOBILE MODE. (cont)
NO OR LOW NBC PRESSURE, MOBILE MODE.
NO OR LOW NBC PRESSURE, MOBILE MODE - Continued.
NO LIGHTS ON FORWARD LIGHT BOX ASSEMBLY, LIGHT BOX, AND MAP LIGHTS, INTERNAL POWER, MOBILE OR STATIC MODE.
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL" OR "VENT", INTERNAL OR EXTERNAL POWER, STATIC MODE.
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL" OR "VENT", INTERNAL OR EXTERNAL POWER, STATIC MODE. (cont) - TM-10-5410-228-100226
LOW AIRFLOW, ESS MODE SELECTOR SWITCH IN "HEAT", "COOL" OR "VENT", INTERNAL OR EXTERNAL POWER, STATIC MODE. (cont) - TM-10-5410-228-100227
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE.
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE - Continued. - TM-10-5410-228-100229
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE - Continued. - TM-10-5410-228-100230
NO OR LOW NBC PRESSURE, INTERNAL OR EXTERNAL POWER, STATIC MODE - Continued. - TM-10-5410-228-100231
NO LIGHTS IN ABS, INTERNAL POWER, STATIC MODE.
NO LIGHTS IN ABS, INTERNAL POWER, STATIC MODE - Continued.
NO HOT AIR, INTERNAL POWER, MOBILE OR STATIC MODE (NO TQG SUPPLEMENTAL).
NO HOT AIR, INTERNAL POWER, MOBILE OR STATIC MODE (NO TQG SUPPLEMENTAL). (cont)
LOW HEAT WITH TQG SUPPLEMENTAL, INTERNAL POWER, STATIC MODE.
LOW HEAT WITH TQG SUPPLEMENTAL, INTERNAL POWER, STATIC MODE - Continued.
NO AIR CONDITIONING, INTERNAL POWER, STATIC MODE.
NO AIR CONDITIONING, INTERNAL POWER, STATIC MODE - Continued.
RIB PRESSURE LOW, AIR BEAMS DO NOT INFLATE WHEN RIB FAN SWITCH IS PRESSED, INTERNAL POWER, STATIC MODE.
RIB PRESSURE LOW, AIR BEAMS DO NOT INFLATE WHEN RIB FAN SWITCH IS PRESSED, INTERNAL POWER, STATIC MODE. (cont)
NO POWER TO LMS, EXTERNAL POWER.
NO AIRFLOW INSIDE OF ABS, EXTERNAL POWER.
NO AIR FLOW INSIDE OF ABS, EXTERNAL POWER - Continued.
NO AIR CONDITIONING, EXTERNAL POWER.
NO AIR CONDITIONING, EXTERNAL POWER - Continued.
NO HOT AIR, EXTERNAL POWER.
NO LIGHTING IN ABS, EXTERNAL POWER.
NO LIGHTING IN ABS, EXTERNAL POWER - Continued. - TM-10-5410-228-100249
NO LIGHTING IN ABS, EXTERNAL POWER - Continued. - TM-10-5410-228-100250
NO POWER TO SYSTEM - ECV RUNNING, INTERNAL POWER, STATIC OR MOBILE MODE.
Table 3-2. Circuit Breaker and Switch Configuration for Mobile Mode
Table 3-4. Circuit Breaker and Switch Configuration for Static Mode, Internal Power, HEAT, Non-NBC
Table 3-6. Circuit Breaker and Switch Configuration for Static Mode, Internal Power, HEAT, NBC
Table 3-8. Circuit Breaker and Switch Configuration for Static Mode, External Power, HEAT, Non-NBC
Section III. OPERATOR MAINTENANCE PROCEDURES
Figure 3-1. Forward Light Box Assembly Lamp Replacement
Rear Light Box Assembly Lamp Replacement.
Pushbutton Switch Assembly Lamp Replacement.
ENVIRONMENTAL CONTROL UNIT (ECU). - TM-10-5410-228-100260
Filter Cleaning.
Drain Hydraulic Overflow Container.
Fill Hydraulic Reservoir.
Figure 3-7. Fill Hydraulic Reservoir
NBC Filter Replacement.
Figure 3-8. NBC Filter Replacement
AIR BEAM SHELTER (ABS). - TM-10-5410-228-100267
Fabric Repair
Figure 3-9. Fabric Repair (Sheet 1 of 2)
Figure 3-9. Fabric Repair (Sheet 2 of 2)
ABS Line Replacement.
Figure 3-10. ABS Line Replacement
ABS Light Fuse Replacement.
ABS Light Lamp Replacement.
Chapter 4. ENTRY AND EXIT PROCEDURES FOR THE CBPS
Section II. EQUIPMENT AND SUPPLIES
Section III. ENTRY AND EXIT PROCEDURES
Section IV. MONITORING PROCEDURES WITH CAM/ICAM
MONITORING AMBULATORY PATIENTS IN AIRLOCK.
Appendix a. REFERENCES - TM-10-5410-228-100281
TECHNICAL BULLETIN/MANUALS
Appendix B. COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS
Section II. COMPONENTS OF END ITEM LIST
Section II. COMPONENTS OF END ITEM LIST - Continued
Figure B-1. Components of End Item (Sheet 1 of 4)
Figure B-1. Components of End Item (Sheet 2 of 4)
Figure B-1. Components of End Item (Sheet 3 of 4)
Figure B-1. Components of End Item (Sheet 4 of 4)
Section III. BASIC ISSUE ITEMS - TM-10-5410-228-100290
Figure B-2. Basic Issue Items
Appendix C. ADDITIONAL AUTHORIZATION LIST - TM-10-5410-228-100293
Appendix D. EXPENDABLE AND DURABLE ITEM LIST
Section II. EXPENDABLE AND DURABLE ITEM LIST
Appendix E. LOAD PLAN
HIGH MOBILITY TRAILER (HMT) LOADING
Figure E-1. HMT Load Plan (Sheet 1 of 5)
Figure E-1. HMT Load Plan (Sheet 2 of 5)
Figure E-1. HMT Load Plan (Sheet 3 of 5)
Figure E-1. HMT Load Plan (Sheet 4 of 5)
Figure E-1. HMT Load Plan (Sheet 5 of 5)
LIGHTWEIGHT MULTIPURPOSE SHELTER (LMS) LOADING.
Table E-1. FST Load Plans
FORWARD SURGICAL TEAM (FST) AND LEVEL II MEDICAL TREATMENT FACILITY (MTF) LOAD PLANS
Figure E-2. FST, LMS - OR (Sheet 2 of 2)
Figure E-3. FST, HMT - OR (Sheet 2 of 3)
Figure E-4. FST, LMS - Post Op
Figure E-5. FST, HMT - Post Op (Sheet 1 of 3)
Figure E-5. FST, HMT - Post Op (Sheet 2 of 3)
Figure E-6. FST, LMS - Pre Op (Sheet 1 of 2)
Figure E-6. FST, LMS - Pre Op (Sheet 2 of 2)
Figure E-7. FST, HMT - Pre Op (Sheet 1 of 4)
Figure E-7. FST, HMT - Pre Op (Sheet 2 of 4)
Figure E-7. FST, HMT - Pre Op (Sheet 3 of 4)
Figure E-7. FST, HMT - Pre Op (Sheet 4 of 4)
Table E-2. MTF Load Plans- Dental
Figure E-8. MTF, LMS - Dental (Sheet 1 of 2)
Figure E-9. MTF,HMT Dental (Sheet 1 of 5).
Figure E-9. MTF, HMT Dental (Sheet 3 of 5).
Figure E-9. MTF, HMT Dental (Sheet 5 of 5).
Table E-3. MTF Load Plans- EMT
Figure E-10. LMS, MTF EMT (Sheet 1 of 2).
Figure E-10. LMS, MTF EMT (Sheet 2 of 2).
Figure E-11. HMT, MTF EMT (Sheet 2 of 4).
Figure E-11. HMT, MTF EMT (Sheet 3 of 4).
Table E-4. MTF Load Plans- Patient Hold
Figure E-12. LMS, MTF Patient Hold.
Figure E-13. HMT, MTF Patient Hold (Sheet 2 of 3).
Table E-5. MTF Load Plans - X-Ray
Figure E-15. HMT, MTF X-Ray (Sheet 1 of 2).
Appendix F. CHEMICAL BIOLOGICAL PROTECTIVE SHELTER (CBPS) SYSTEM DECONTAMINATION (DECON)
SEQUENCE OF OPERATIONAL DECON PROCEDURES.
SEQUENCE OF THOROUGH DECON PROCEDURES.
Figure F-1. Fixed-Site CBPS Decon Configuration
Table F-1. CBPS Post-Through Decon Replacement Items
Table F-1. CBPS Post-Through Decon Replacement Items - Continued
Appendix G. CBPS PERFORMANCE MEASURES
CBPS Performance Measures (LMS Crew)
TM-10-5410-228-10 Chemical Biologiocal Protective Shelter (CBPS) System NSN 5410-01-441-8054 (Green) (EIC:5ZT) NSN 5410-01-482-4633 (Tan) Manual
