TM 10-5410-228-10
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS
B - BEFORE D - DURING A - AFTER H - HOURLY
Location
Item
Item to
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
MOBILE MODE
NOTE
Items 1 through 60 pertain to CBPS when set for mobile mode, and are accomplished before
starting the mission. ECV should be OFF. Refer to Figure 2-1, sheets 1 through 7.
Mobile mode inspection comprises ECV modified components, LMS, stowed ABS and packed
HMT.
Start at front of ECV, continue around passenger side, around rear and then around driver
side of CBPS.
Install ECU work platform per para 3.12.1 to check ECU.
Inventory spare parts kit and ABS repair kit.
ECV - front with
hood raised
1, sheet 1
B
Primary hydraulic
Check for damaged hoses,
Damaged hoses and
pump hoses and
loose or missing hardware,
loose or missing
fittings
and evidence of leaks.
hardware which
prevent normal
operation. Class III
leak, refer to para 2.20.
Belt cracked, fraying or
2
B
Belt
Check belt for cracks and
loose. Teeth missing.
fraying per TM 9-2320-
387-10. Check for missing
teeth.
3
B
Pulley and face
Check for loose or missing
Loose or missing
plate
hardware.
hardware which
prevents normal
operation.
4
B
Electronically Pro-
Check for loose or missing
Loose or missing
grammed Governor
hardware.
hardware which
(EPG) actuator and
prevents normal
linkage
operation.
ECU - passenger
side
5
B
Ensure dust covers are
compressor test
installed.
ports
2-35
