TM 10-5410-228-10
(17) On rear control panel (1), verify POWER MODE switch (5) is set to INT.
NOTE
MISSION PROFILE MOBILE indicator will not light if INSTM CONT circuit breaker is not
ON and ESS MODE selector switch is in OFF position.
(18) Set MISSION PROFILE switch (6) to MOBILE. MOBILE indicator will light (white).
(19) Verify inverter (7) and converter (8) power switches are OFF.
(20) Verify converter circuit breaker (9) is set to OFF.
Figure 2-28. Rear Control Panel Settings Using Internal Power During Striking
2-105
