TM 10-5410-228-10
3.12.2 Filter Cleaning.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools/Test Equipment:
Equipment Conditions:
Shop Equipment, Automotive Maintenance and
ECV parking brake set.
Repair
ECU work platform installed (see para 3.12.1).
a. Removal
(1)
Turn six allen screws (1) and remove driver side rear cover assembly (2) from ECU (3).
(2)
Turn three screw heads (4) 90 and open hinged access door (5).
(3)
Slide filter (6) out of ECU (3). Wash filter (6) with water.
(4)
Release ten screws (7) and remove prefilter cover assembly (8) from passenger side of ECU (3).
(5)
Slide filter (9) out of ECU (3). Wash filter (9) with water.
b. Installation
NOTE
Note direction of airflow arrow on filter when installing.
(1)
Align filter (9) between rails and slide into ECU (3).
(2)
Position cover assembly (8) and secure to passenger side of ECU (3) with ten screws (7).
(3)
Align filter (6) in between rails and slide into ECU (3).
(4)
Close hinged access door (5) and turn three screw heads (4) 90 to secure.
(5)
Position driver side rear cover assembly (2) on ECU (3) and turn six allen screws (1) to secure.
Figure 3-5. Filter Replacement
3-51
