TM 10-5410-228-10
2.25.2.2
Deployment Using Internal (ECV) Power.
If any engine indicators come on during system start up or operation, shut system down,
switch to external power, and proceed to troubleshooting (Chapter 3, Section II). Continuing
start up or operation without correcting problem can damage system.
NOTE
MISSION PROFILE STATIC indicator will not light if INSTM CONT circuit breaker is not
ON and ESS MODE selector switch is in OFF position.
(4)
Set MISSION PROFILE switch (9) to STATIC. STATIC indicator will light (white).
(5)
Ensure ESS MODE selector switch (10) is set to VENT, HEAT or COOL.
(6)
Proceed to para 2.25.2.4 for ABS setup procedures.
2-120
