TM 10-5410-228-10
2.24.1.2
Mobile Operation Switchover From Non-NBC To NBC Conditions - Continued.
Figure 2-3. Rear Control Panel Settings in Mobile Mode
If any engine or hydraulic warning (red) indicator comes on during system start up or
operation, proceed to troubleshooting (Chapter 3, Section II) to take corrective action.
Continuing start up or operation without correcting the problem can damage system. Over
ride should only be used in a life threatening situation.
(3)
Monitor gages and hydraulic indicators to verify that all systems are operational.
(4)
Verify with LMS crew that access door and emergency exit panel are closed and latched.
b. LMS Crew Tasks
(1)
Put on chemically protective masks.
2-64
