TM 10-5410-228-10
2.21 OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Continued.
(5)
Not Fully Mission Capable If: column. Information in this column tells you what faults will keep
your equipment from being capable of performing its primary mission. If you make check and
service procedures that show faults listed in this column, do not operate the equipment. Follow
standard operating procedures for maintaining the equipment or reporting equipment failures.
d. Other Table Entries. Be sure to observe all special information and notes that appear in your table.
If the equipment must be kept in continuous operation, do only procedures that can be done
without disturbing operation. Make complete checks and services when equipment is shut
down.
e.
Location Diagram. To assist you in the performance of PMCS, a PMCS location diagram (figure 2-1)
depicting the order by which checks and services must be accomplished has been provided.
Referenced figure items are applicable to BEFORE, DURING and AFTER intervals in table 2-1.
2-22
