TM 10-5410-228-10
(10) Remove sealing iron (2) and press cooling block (8) against hot patch area for ten to fifteen
seconds to draw out heat.
(11) Repeat sealing process, as required, until entire patch (11) has been sealed in place. Ensure that
all outside edges and corners have been totally sealed.
(12) After repaired area has cooled, check all edges and corners to ensure that patch (11) is bonded
securely. If any edges or corners are loose, repeat sealing process.
Figure 3-9. Fabric Repair (Sheet 1 of 2)
3-59
