TM 10-5410-228-10
(2)
Release parking brake and operate ECV as mission requires.
b. LMS Crew Tasks
(1)
On rear control panel (1, figure 2-3), set POWER MODE switch (2) to INT and the following
circuit breakers on rear control panel to ON:
HEAT/COOL (3)
NBC/VENT (4)
INSTM CONT (5)
LTG/INTERCOM (6).
NOTE
MISSION PROFILE MOBILE indicator will not light if INSTM CONT circuit breaker is not
ON.
(2)
Set MISSION PROFILE switch (7) to MOBILE. MOBILE indicator lights (white).
(3)
Set ESS MODE selector switch (8) on rear control panel (1) to VENT, HEAT or COOL.
(4)
Set lights on as required.
NOTE
TEMPERATURE control on the control box assembly functions only in MOBILE mode.
(5)
Adjust TEMPERATURE control (9) on control box assembly (10) to desired setting.
(6)
This completes setup for mobile mode operation.
Personnel riding in the LMS must remain seated with safety belts fastened during ECV
movement.
(7)
Operate system as mission requires.
2.24.1.2
Mobile Operation Switchover From Non-NBC To NBC Conditions.
Cab crew must be in full MOPP gear.
LMS crew must wear chemically protective masks.
Ensure that all doors are secured.
a. Cab Crew Tasks
(1)
Stop ECV, put transmission in park and set parking brake. ECV must remain running.
(2)
Put on full chemically protective clothing and masks.
2-63
