TM 10-5410-228-10
Table 2-1. Operator Preventive Maintenance Checks and Services for CBPS - Continued
B - BEFORE D - DURING A - AFTER H - HOURLY
Location
Item
Item to
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
NOTE
Install ECU work platform per para 3.12.1 to check ECU.
ECU
35, sheet 2
B
Condenser fan grill
Check for blockage. Remove
Any blockage of air
all dirt and debris from grill.
flow.
To prevent injury to personnel from a fall, use care when climbing on and descending from
LMS roof. Always use steps and hand supports.
36
B
Covers/doors
Check for loose or missing
Covers or doors
latches and hardware, loose
damaged jeopardizing
the integrity of ECU.
or damaged gaskets and
damaged covers/doors.
Check for hydraulic and air
37, sheet 4
B
Internal ECU
Damaged wiring or
conditioner leaks, burnt or
Class III leaks.
damaged wiring, and loose
or missing clamps.
38
B
Recirculation filter
Open doors/covers on ECU.
Check for blockage. Remove
all dirt and debris. Wash per
para 3.12.2.
39
B
NBC filters
Check for missing or
NBC filters missing or
damaged.
damaged NBC filters. If
missing or damaged, replace
per para 3.12.5.
Do not mix or substitute any other hydraulic fluid with MIL-H-5606.
40
B
Hydraulic fluid
Check sight gage for fluid.
No fluid showing in
level
Add fluid per para. 3.12.4.
sight glass.
NOTE
Item 40 is accomplished while on top (roof) of LMS.
LMS - top
Grab handle (driver Check for excessive wear
41, sheet 2
B
side)
and rust; ensure handle can
be raised and lowered freely.
2-39
