TM 10-5410-228-10
3.11.2 Rear Light Box Assembly Lamp Replacement.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools/Test Equipment:
Equipment Conditions:
Screwdriver
System power OFF. ECV parking brake set.
LTG/INTERCOM circuit breaker OFF and tagged.
Materials/Parts:
Incandescent Lamp (08803) 4593 or equivalent
a. Removal
(1)
Pull lamp (1) and lamp retainer (2) from light box (3).
(2)
Tag wires and remove two screws (4) securing wires to lamp (1).
(3)
Pull lamp (1) from lamp retainer (2).
b. Installation
(1)
Install lamp (1) on lamp retainer (2).
(2)
Secure wires to lamp (1) with two screws (4). Remove tags from wires.
(3)
Install lamp (1) and lamp retainer (2) on light box (3).
Figure 3-2. Rear Light Box Assembly Lamp Replacement
Follow-on maintenance: Turn on lamp to ensure lamp is working properly. Remove tag from
LTG/INTERCOM circuit breaker.
3-48
