TM 10-5410-228-10
To prevent injury to personnel, use caution when dropping down from LMS into ABS.
NOTE
When air beams are inflated to correct pressure, rib fan will automatically stop and rib
PRESSURE NORMAL indicator will light (white).
(3)
Ensure fastener hook and fastener loop connection on fabric air duct (4) is securely attached to
fastener hook and fastener loop connection on transition duct assembly (5). Adjust flaps along
bottom of fabric air duct (4) for desired amount of air flow.
(4)
Check air beam manifold (1, figure 2-39) and ensure shut-off valves (2) on flexible hoses (3)
connected to each air beam (4) are completely open (in-line with hoses).
Figure 2-37. Monitoring ABS Inflation
2-125
