TM 10-5410-228-10
3.13.4 ABS Light Lamp Replacement.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Lamp (81348) W-L-00116/28A
ABS light disconnected from extension cords and
removed from ceiling straps.
a. Removal
(1)
Remove end cap (1) from light assembly (2).
(2)
Depress retainer connector (3) and pull lamp holder (4) from lamp (5).
(3)
Remove lamp (5) from light assembly (2).
b. Installation
(1)
Install lamp (5) in light assembly (2) through retainer clips (6), keeping the connector pins (7) in
a vertical position.
(2)
Install lamp holder (4) on lamp (5).
(3)
Install end cap (1) on light assembly (2).
Figure 3-12. ABS Light Lamp Replacement
3-64
