TM 10-5410-228-10
2.25.2.4
Air Beam Shelter (ABS) Setup Procedures Under NBC Conditions - Continued.
Figure 2-38. ABS Inflation
NOTE
Outer TALP and ambulatory airlock doors are stowed on HMT.
Inner ambulatory and TALP airlock doors are stowed in LMS.
TALP rails, recirculation fans and medical chests are stowed in LMS.
(5)
Locate inner TALP airlock door in LMS.
NOTE
As door is worked into opening, avoid pressing fastener hook and fastener loop tape in place.
Ambulatory airlock doors open inward.
Do not roll door flaps out of the way. Leave in closed position.
(6)
Attach TALP fabric tunnel (1, figure 2-40) to inner TALP airlock door (2) by placing fabric
tunnel (1) between inner TALP airlock door (2) and retaining clamp (3), making sure grommets
engage airlock door (2) posts. Engage latch clamp (4) to secure fabric tunnel (1) to inner TALP
airlock door (2).
2-126
