TM 3-6665-329-13&P
3-41 LINE FILTER (FL2).
This task covers:
Removal.
a.
Installation.
b.
INITIAL SETUP
Tools:
Electronic equipment tool
kit TK-100/G
Equipment conditon: Lid and panel assembly removed during troubleshooting.
Removal.
a.
(1) Remove wires 91, 92 from line filter (3).
(2) Remove nut (1), washer (2) and line filter (3) from case.
(3) Remove remaining wire 127 from line filter FL2.
Installation.
b.
(1)
Solder wire 127 to line filter FL2.
Install and secure line filter (3) with washer (2) and nut (1).
(2)
(3)
Solder wire no. 91 and 92 to line filter (1).
3-95