3-45 TEMPERATURE SENSOR (INLET TEMP).
This task covers;
Removal.
a.
Installation.
b.
INITIAL SETUP
Tools:
Electronic equipment tool
kit TK-100/G and TK-105/G
Removal.
a.
(1) Remove lid and panel assembly (para 3-11b steps 1 thru 8).
(2) Unscrew screw (1) and open cable cover assembly (2).
TO PREVENT DAMAGE TO THE TEMPERATURE SENSOR TERMINAL LUGS AND
RUBBER BUSHING USE CARE DURING REMOVAL AND
INSTALLATION PROCEDURES.
(3) Loosen cable clamp screws (3).
(4) Cut wire ties (4).
3-99
