TM 3-6665-329-13&P
3-37 RECEPTACLE CONNECTOR.
This task covers:
Removal.
a.
Installation.
b.
INITIAL SETUP
Tools:
Electronic equpment tool
Kit TK-105/G
Removal.
a.
(1)
Remove lid and panel assembly (para 3-11 b steps 1 thru 8).
(2)
Remove four screws (1), nuts (2) and Iockwashers (3).
(3)
Remove connector (4).
(4)
Unsolder wires (5) from pin connections.
b.
Installation.
(1) Using FO-2 as a guide, solder wires (5) to pin connectors.
(2) Position receptacle connector on panel assembly so that board key-slot is at the top of
the panel assembly (6).
(3) Insert four screws (1) through panel assembly and recpetable connector; position ground
lug on one screw. Install Iockwasher (3) and nuts (2) on screws (1) and tighten screws.
(4) Replace panel assembly and lid (para 3-11c steps 4 thru 8 and 20).
3-91
