TM 3-6665 -329-13&P
3-44 BRACKET ASSEMBLY LATCH (CABLE STORAGE).
This task covers:
a.
Removal.
b.
Installation.
INITIAL SETUP
Tools:
Electronic equipment tool
kit TK-105/G
Removal
a.
(1) Remove lid and panel assembly (para 3-11b steps 1 thru 8).
(2) Remove circuit card assembly (para 3-47a steps 2 and 3).
(3) Unscrew screw (1) and open cable cover assembly (2),
(4) Remove two screws (3), nuts (4), Iockwashers (5), flatwashers (6), and bracket
assembly latch (7).
b.
Installation.
(1) Install two screws (3), flatwashers (6), bracket assembly latch (7), Iockwashers (5), and
nuts (4).
(2) Install circuit card assembly (para 3-47b steps 1 and 2).
(3) Close and secure cable cover assembly (2) with screw (1).
(4) Install panel assembly and lid (para 3-11c steps 4 thru 8 and 20).
3-98