TM 3-6665 -329-13&P
This task covers:
Removal.
a.
Installation.
B.
INITIAL SETUP
Tools:
Electronic equipment tool
kit TK-100/G and TK-105/G
Removal.
A.
(1) Remove lid and panel assembly (para 3-11 b steps 1 thru 8).
(2) Remove three screws (1) and Iockwashers (2) and circuit card assembly (3).
(3) Unsolder wire or wires from tip jack (4).
NOTE
Some tip jacks only have one wire.
(4) Remove one nut (5) and one Iockwasher (6).
(5) Remove tip jack (4).
Installation.
b.
(1)
Insert tip jack (4).
Secure with Iockwasher (6) and nut (5).
(2)
SoIdler wire to tip jack (4).
(3)
Replace circuit card assembly (3) and secure with three Iockwashers (2) and screws (1).
(4)
Install panel assembly and lid (para 3-11c steps 4 thru 8 and 20).
(5)