3-45 TEMPERATURE SENSOR (INLET TEMP).
Install INLET TEMP cable (5) into housing subassembly (9) and secure by turning collar
(3) Pull INLET TEMP cable (5) terminal lugs (7) through bushing (8), until the cable is long
enough to attach terminal lugs to proper terminals.
Cut tape from terminals (7).
Using FO-2 as a guide connect wires removed in step a5.
Tighten clamp screws (3) and tie wires with lacing and tying tape.
(7) Place all cable assemblies into CABLE STORAGE compartment and secure cable cover
assembly with screw.
(8) Install panel assembly and lid. (para 3-11c steps 4 thru 8 and 20).