TM 5-3655-214-13&P
4-18. TOOL BOX
This task covers:
a. Removal
c.
Repair
b. Cleaning, Inspection
d. Installation
INITIAL SETUP
Equipment
Condition
Applicable Configurations
Para
Condition Description
All
Equipment is OFF
Test Equipment
None
Special Tools
Special Environmental Conditions
None
None
Materials/Parts
General Safety Instructions
None
Observe Warnings and
Cautions
Personnel Required
MOS 52C
LOCATION/ITEM
ACTION
REMARKS
REMOVE
1. Tool Box
a. Open tool box and refer to illustration
at the end of this section. Remove four
screws (1), four lockwashers (2), four
flat washers (3) and four nuts (4).
b. Remove tool box (5) from skid (6).