TM 5-3655-214-13&P
4-17. SUPPORTS - Continued
LOCATION/ITEM
ACTION
REMARKS
INSPECTION
3.
a. Inspect screws and nuts for damaged
threads.
b. Inspect supports for cracks and ob
vious damage.
REPAIR
4.
a. Replace defective parts as required.
INSTALLATION
5.
(1) Refer to the illustration following and
align screw holes in supports (17) and
(18) with center support (5).
(2) Install four screws (14), four flat
washers (15) and four lockwashers (16)
thru supports (17), (18) and center sup
port (5).
(3) Install two screws (11) two flat washers
(12) and two lockwashers (13) attaching
supports (17) and (18) to skid base.
(4) Attach center support (10) to cradle
support (5) and skid base with four
screws (7), eight flat washers (8), eight
lockwashers (9) and eight nuts (6).
(5) Install stud on cradle (4) thru hole in
cradle support (4).
(6) Install two flat washers (2) and one nut
(2); tighten nut so that washers are
snug against cradle support (5) and
permit cradle (4) to rotate easily.
(7) Align slot in nut (2) with hole in welded
stud on cradle (4) and install cotter pin
(1) to lock nut in place.
4-37
