TM 5-3655-2141 3&P
4-12. MOTOR PULLEY
This task covers:
a. Removal
d. Repair
a. Cleaning
e. Installation
c.
Inspection
INITIAL SETUP
Equipment
Condition
Applicable Configurations
Para
Condition Description
All
Equipment is OFF
Test Equipment
None
Special Tools
Special Environmental Conditions
None
None
General Safety Instructions
Materials/Parts
None
Observe all Warnings and
Cautions
Personnel Required
MOS 52C
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Pulley
a. Remove belt.
b. Refer to illustration at the end of this
section and remove setscrew (1) from
motor pulley (2).
c.
Remove pulley (2) from motor (3).
d. Remove key (4) from motor shaft.