TM 5-3655.214-13&P
4-11. PUMP PULLEY
This task covers:
a. Removal
d. Installation
b. Cleaning
c.
Repair
INITIAL SETUP
Equipment
Condition
Applicable Configurations
Para
Condition Description
All
Equipment is OFF
Test Equipment
None
Special Tools
Special Environmental Conditions
None
None
Materials/Parts
General Safety Instructions
None
Observe Warnings and Cau-
tions
Personnel Required
MOS 52C
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Pump Pulley
a. Remove belt.
b. Refer to illustration - at the end of this
section and remove setscrew (1) from
pump pulley (2).
c.
Remove pump pulley (2) from pump (3).
d. Remove key (4) from pump shaft.
4-14