TM 3-6665-329-13&P
Installation.
b.
BE CAREFUL NOT TO BREAK SEAL BETWEEN THE PLUG CAP ASSEMBLY AND
NONMETALLIC TUBING ASSEMBLY (4).
(1) Stretch grommet over plug cap assembly (5) and slide down nonmetallic tubing until
even with slot (6).
(2) Return nonmetallic tubing assemblies (3) to storage compartment.
(3) Lower PNEUMATIC LINE STORAGE cover assembly (2) and finger tighten screw (1).
(4) Install lid (para 3-11c step 20).
3-66