Pump Unit Assembly/
Wire (1)
Replace authorized unserviceable parts. Fabricate new wire (1) according
Wire (2)
to figure D-16. Fabricate new wire (2) according to figure D-17.
REASSEMBLY
Pump Unit Assembly/
Control panel assembly (1)
Position control panel assembly (1) into place. Guide loose ends of wires
Connect the electrical wiring and cables to the engine
Pump unit subassembly (2)
and cables through the pump unit subassembly (2) frame. Secure control
as required to make operational. Some minor adjust-
Lock washers (3)
panel assembly (1) with 14 lock washers (3) and hexagon head cap
ments may be required to get proper movement of the
Hexagon head cap
screws (4).
throttle and choke after final assembly.
screws (4)
2-37
TM 3-4230-209-30&P
