Pump Unit Assembly/
Insert shell (37) into position and adjust so edge is recessed about 1/4
Shell (37)
inch inside the frame. Install 14 thread tapping screws (38) and tighten.
Thread tapping screws (38)
Position gun bracket (39) onto shell (37) and aline holes. Install two
Gun bracket (39)
machine screws (40) and flat washers (41) through gun bracket (39) and
Machine screws (40)
shell. Secure with hexagon head self-locking nuts (42). Repeat proce-
Flat washers (41)
dures for mounting other gun bracket.
Hexagon head self-locking
nuts (42)
2-15. ENGINE FUEL TANK.
This task covers:
c. Reassembly
a. Disassembly
b. Repair
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Unit maintenance authorized components are removed in
Automotive Maintenance and Repair Field Maintenance
TM 3-4230-209-20&P and are not covered in this manual.
Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31)
Special Safety Instructions
Materials/Parts
Antiseizing tape (item 38, app C)
General purpose lubricating oil (item 24, app C)
WARNING
Polyurethane coating (green) (item 29, app C)
Gasoline vapor in the fuel tank is hazardous. Purge the fuel tank before
Wire brush (item 7, app C)
performing maintenance. Smoking or open flame around the fuel tank is
prohibited.
References
TM 38-230-1
TM 43-0139
TM 3-4230-209-30&P
2-41
