TM 10-5410-228-24
Cable No.
No.
Mates to
Comments
1W1
P1
1A4A9J2
Connected externally from power panel to 10 kW TQG.
1A1W2
AC
1A4W3J1
Direct wired on AC motor (refer to para 3.7.1), connected to cable
motor
1A4W3 connector J1 through pan and frame assembly. Routed from
ECV compartment to pan and frame assembly.
1A1W3
P2
1A4A8J1
Connected to vehicle control box (refer to para 2.12.14) to cable
P1
1A4W4J1
1A4W4 connector J1 through pan and frame assembly. Routed from
ECV cab to compartment to pan and frame assembly.
1A4W1
P1
1A4A4J9
Connected to back of rear control panel (refer to para 2.13.22) to
P2
J1 relay box
relay box (refer to para 2.13.19) to cable 1A1W1 connector P1
J1
1A1W1P1
through pan and frame assembly. Routed from pan and frame
assembly through raceway to rear control panel.
1A4W2
P1
1A4A4J4
Direct wired from ECU electrical heaters and connected to back of
P2
1A4A1W2J2
rear control panel (refer to para 2.13.22). Routed from ECU through
LMS (behind forward control panel, refer to para 2.13.16) through
raceway to rear control panel.
1A4W3
P1
1A4A4J8
Connected to back of rear control panel (refer to para 2.13.22)
J1
1A1W2P1
through raceway to cable 1A1W2 connector P1 through the pan
assembly (cable 1A1W2 is direct wired to AC motor in the ECV wheel
well).
1A4W4
P1
1A4A18J2
Connected to back of control box assembly (refer to para 2.13.18)
J1
1A1W3P1
through raceway to cable 1A1W3 connector P1 through the pan and
frame assembly.
1A4W6
P1
1A4A1W1J1
Connected to back of rear control panel (refer to para 2.13.22)
P2
1A4A4J2
through raceway to back of control box assembly (refer to para
P3
1A4A14J1
2.13.18) through LMS to ECU to cable 1A4A1W1 connector J1.
1A4W7
P1
1A4A5J1
Direct wired from light box (refer to para 2.13.17) through raceway to
P2
1A4A4J14
back of rear control panel (refer to para 2.13.22) through raceway to
1A4A7
back of control box assembly (refer to para 2.13.18).
J3
1A4A18P3
1A4W9
P1
1A4A4J7
Connected to back of rear control panel (refer to para 2.13.22) to back
P2
1A4A12J2
of converter (refer to para 2.13.20).
1A4W10
P1
1A4A4J10
Connected to back of rear control panel (refer to para 2.13.22) to back
P2
1A4A12J1
of converter (refer to para 2.13.20).
1A4W11
P1
1A4A4J11
Connected to back of rear control panel (refer to para 2.13.22) to back
P2
1A4A13J1
of inverter (refer to para 2.13.21).
1A4W12
P1
1A4A4J6
Connected to back of rear control panel (refer to para 2.13.22) to back
P2
1A4A13J2
of inverter (refer to para 2.13.21).
1A4W13
P1
1A4A4J3
Direct wired to back of power panel (refer to para 2.13.30), connected
1A4A9
to back of rear control panel (refer to para 2.13.22).
1A4W14
P1
1A4A4J1
Direct wired to back of power panel (refer to para 2.13.30), attached
1A4A9
to back of rear control panel (refer to para 2.13.22).
1A4W18
P1
1A4W23J1
Connected to cable 1A4W23 connector J1 through pan and frame
P2
1A4A20
assembly. Routed from cable splitter 1A4A20J1 in ECV cab to pan
and frame assembly.
1A4W19
P1
1A4W24J1
Connected to cable 1A4W24 connector J1 through pan and frame
P2
1A4A21
assembly. Routed from cable splitter 1A4A21J1 in ECV cab to pan
and frame assembly.
2-243
