TM 10-5410-228-24
(10) Install spiral wrap on cable assembly 1A4A1W2.
(11) Pull cable assembly 1A4A1W2 through grommet in ECU.
(12) Secure direct wired end of cable assembly 1A4A1W2 to heater elements. Remove tags.
(13) Secure cable assembly 1A4A1W2 connector J2 to ECU with four screws (1), four new
lockwashers (2), four flat washers (3) and four nuts (4).
(14) Install clamp (21) on cable assembly 1A4A1W2. Secure clamp (21) and cable assembly
1A4A1W2 to ECU with screw (17), new lockwasher (18), two flat washers (19) and nut (20).
(15) Install tie-down straps as required.
(16) Turn on system power and verify system functions correctly.
2-247
