TM 5-3740-218-13&P
ALL ANGLE ISOLATOR REPLACEMENT
This task covers:
Removal
Installation
A.
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Tool Kit, 5180-00-177-7033
Reference
Condition Description
Engine and Pump
Assembly Removed
B.
REMOVAL
Remove each all angle isolator (1) from engine plate (2) by removing two nuts (3), four washers (4), and two bolts
(5).
C.
INSTALLATION
Align each all angle isolator (1) on engine plate (2) and install two bolts (5), four washers (4), and two nuts (3).