TM 5-3740-218-13&P
BATTERY/HYDRAULIC ASSEMBLY REPLACEMENT
This task covers:
Removal
Installation
A.
INITIAL SETUP
Tools and Special Equipment:
General Safety Instructions:
Tool Kit, 5180-00-177-7033
WARNING
Personnel Required: (2)
Battery/hydraulic assembly is very heavy. Use two
Equipment Condition:
persons when lifting or moving assembly to prevent
personal injury.
Reference
Condition Description
Engine Removed
B.
REMOVAL
(1)
Remove battery (1) (para 4-33).
(2)
Disconnect two hydraulic hoses from inlet (2) and outlet (3) 90-degree elbow fittings. Cap open hydraulic
lines.
(3)
Remove electrical leads (4) from secondary hydraulic manifold 12 VDC coil (5).
(4)
Support battery/hydraulic assembly (6) and remove four nuts (7), four washers (8), four bolts (9), and four
washers (8) from two side supports (10) at four bucket leg weldment unions (11).
WARNING
Battery/hydraulic assembly is very heavy. Use two persons when lifting or moving
assembly to prevent personal injury.
(5)
Using two persons, lift battery/hydraulic assembly (6) until side supports (10) clear all four bucket leg
weldment unions (11) and remove battery/hydraulic assembly (6).