TM 5-3740-218-13&P
(8)
Remove nut (9), washer (10), and screw (11) from hose clamp (12). Remove hose clamp from fuel hose
(5).
(9)
Disconnect fuel hose (5) from carburetor (13) and remove hose.
(10)
Support gas tank (8) and remove two nuts (14), two washers (15), two screws (16), and two washers (15)
from bucket leg weldment unions (17). Remove gas tank (8).
(11)
If breather filler cap assembly (18) needs to be replaced, remove six slotted-head screws (19) and remove
breather filler cap assembly (18) from gas tank (8).
4-65
