TM 5-3740-214-14
Table 5-3. Direct and General Support Maintenance Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14.
CONTROL PANEL LIGHT DOES NOT LIGHT
NOTE
First make sure the aerosol generator ignition switch was on when the control panel light switch
was turned on.
Step 1.
Make sure there is power to the light. Use a volt-ohmmeter.
WARNING
BE ALERT that the ignition switch is turned OFF before checking the wires.
Figure 5-199. Control Panel Electrical Test
5-182
