TM 5-3740-214-14
Table 2-1. Operator Preventative Maintenance Checks and Services (Continued)
B - Before
D - During
A - After
INTERVAL
FOR READINESS REPORT-
ITEM
ITEM TO BE INSPECTED.
ING, EQUIPMENT IS NOT
NO.
B
D
A
PROCEDURE
READY/AVAILABLE IF:
Figure 2-21. Flush Tank
14
FLUSH TANK
Make sure flush tank is securely fastened to
The flush tank is not secured
engine assembly.
15
BATTERY ASSEMBLY
a. Make sure battery box is securely fastened
Electrolyte is low
to base assembly.
NOTE
Use distilled water or a good grade drinking water
(excluding mineral water).
b. Check electrolyte level.
(1) Undo retainer strap and remove
battery box cover.
(2) Remove cell caps.
(3) Electrolyte level should be suffi-
cient to cover above battery plates. Add
distilled water as necessary.
(4) Install cell caps.
(5) Secure battery box cover in place.
Change 1 2-18
