TM 5-3655-214-13&P
5.4. MOTOR, ELECTRIC (MODEL 12681-7)
LOCATION/ITEM
ACTION
REMARKS
INSPECTION
4.
a
Inspect end bells (12, 13) for cracks or
other defects.
b. Inspect bearings (14) and (15) for loose-
ness, flat edges, or other defects.
c.
Inspect electrical parts for evidence of
overheating, arcing or insulation break-
down.
REPAIR
5.
a
Replace all defective parts.
REASSEMBLY
6.
a
Install switch (16) on rotor (17), and
place rotor in housing (18).
b. Install rear bearing (14) and front end
bearing (15).
c.
Position front end plate (13) and rear
end plate (12) on housing (18) attach
with four bolts (11) and four nuts (10).
d. Position capacitor (9) in place on hous-
ing (18) and solder capacitor leads.
e. Attach capacitor cover (8) with two
screws (7).
f.
Install gasket (6), box (5) with two
screws (4).
g. Install gasket (3), cover (2) with two
screws (1).
INSTALLATION
7.
a
Refer to Chapter 4, and install motor.
5-13