TM 5-3655-214-13&P
5-3. MOTOR, ELECTRIC (MODEL - 12681-2) - Continued
REASSEMBLY
e. Position end bell (21) and end bell (17)
in place on stator and housing (28) and
attach them with four screws (16) and
four nuts (15).
f.
Insert seal (14) in end bell (17).
g. Install gasket (13) and box (12) with two
screws (11).
h. Install gasket (10) and cover plate (9)
with two screws (8).
i.
Solder capacitor (7) leads.
j.
Install capacitor cover (6) with two
screws (5).
k.
Slip fan (4) on rotor shaft and tighten
setscrew. (3).
I.
Install fan cover (2) with four screws (1).
INSTALLATION
4.
a
Refer to Chapter 4 and install motor.
5-9