230
AFMAN 24-204(I)/TM 38-250/NAVSUP PUB 505/MCO P4030.19H/ DLAI 4145.3
11 DECEMBER 2001
A6.22.2. Package items in single packagings consisting of steel drums (1A1 or 1A2), aluminum drum (1B1 or 1B2),
metal drum other than steel or aluminum (1N1 or 1N2), plastic drum (1H1 or 1H2), steel jerrican (3A1 or 3A2),
plastic jerrican (3H1 or 3H2), plastic receptacle in steel, aluminum, fiber or plastic drum (6HA1, 6HB1, 6HG1,
6HH), plastic receptacle in steel, aluminum, wooden, plywood, or fiberboard box (6HA2, 6HB2, 6HC, 6HD2,
6HG2), glass, porcelain or stoneware in steel, aluminum or fiber drum (6PA1, 6PB1, 6PG1), glass, porcelain or
stoneware in steel, aluminum, wooden, or fiberboard box (6PA2, 6PB2, 6PC, 6PG2), glass, porcelain or stoneware
in solid or expanded plastic packaging (6PH1 or 6PH2).
A6.22.3. Any DOT specification cylinders as prescribed for any compressed gas, except for acetylene.
A6.23. Gas Generator Assemblies. Package gas generator assemblies (aircraft) containing liquefied non-
flammable, non-toxic gas and a solid propellant cartridge as follows:
-
Package the gas in specification steel cylinders authorized for any compressed gas except acetylene not
exceeding 10.5L (2.8 gallons) internal volume and having a minimum design burst pressure of 19,000 kPa
(2,857 psi).
-
Protect fittings against damage under conditions normal to transport, any trigger must be fitted with a safety
locking pin, and a non-propulsive plug must be installed on the discharge tube; and
-
Individually and tightly pack each complete unit to prevent movement in wooden boxes (4C1 or 4C2),
plywood boxes (4D), reconstituted wood boxes (4F), fiberboard boxes (4G), or plastic boxes (4H1 and
4H2) of PG II performance level, or in the original manufacturer’s transit box.
