234AFMAN 24-204(I)/TM 38-250/NAVSUP PUB 505/MCO P4030.19H/ DLAI 4145.311 DECEMBER 2001-1A1 or 1N1 drums with a capacity greater than 120 L (32 gallons) must have a minimum thickness of1.35 mm (0.053 inches). 1B1 drums with a capacity greater than 120 L (32 gallons) must have aminimum thickness of 4.7 mm (0.185 inches). 1H1 drums with a capacity greater than 120 L (32gallons) must have a minimum thickness of 3.16 mm (0.124 inches). 6HA1 drums with a capacitygreater than 120 L (32 gallons) must have a minimum thickness of 1.58 mm (0.0625 inches) for theinner plastic drum and a minimum thickness of 1.08 mm (0.43 inches) for the outer steel drum.A7.6.4.1. Cushion the inner drum within the outer drum with a shock-mitigating, non reactive material. There mustbe a minimum of 5.0 cm (2 inches) of cushioning material between the outer surface (side) of the inner drum and theinner surface (side) of the outer drum. There must also be at least 7.6 cm (3 inches) of cushioning material betweenthe outer surface (top and bottom) of the inner drum and the inner surface (top and bottom) of the outer drum.A7.7. Polyester Resin Kits. Polyester resin and fiberglass repair kits consist of two components: a base material inClass 3, PG II or III, and an organic peroxide activator.-Only organic peroxides of Type D, E, or F not requiring temperature controls are authorized.-Assign PG II or III according to the criteria for Class 3, applied to the base material.-Ensure each component is separately packed in an inner packaging. The components may be placed in thesame outer packaging provided they will not react dangerous in the event of leakage.-Pack organic peroxides in inner plastic or flexible tube packaging. Maximum quantity of organic peroxideper inner packaging is 125 ml (4.22 ounces) for liquids and 500 g (1 lb.) for solids.-Pack flammable liquids in inner glass or earthenware, plastic, metal, or aluminum packaging.-Pack the inner packagings in one of the following outer packagings:A7.7.1. Steel (1A2), aluminum (1B2), plywood (1D), fiber (1G), or plastic (1H2) drum.A7.7.2. Steel (3A2) or plastic (3H2) jerrican.A7.7.3. Fiberboard (4G), wooden (4C1 or 4C2), reconstituted wood (4F), plywood (4D), or plastic (4H2) box.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business