AFMAN 24-204(I)/TM 38-250/NAVSUP PUB 505/MCO P4030.19H/ DLAI 4145.3 219 11 DECEMBER 2001 Name of Gas Maximum Permitted Filling Density in Percent (See A3.3.2.5) Cylinders Marked as Shown Below Must be Used Ethylene (see notes 4 and 5) 31.0 DOT -3, DOT-3A1800, DOT -3AA1800, DOT-3AAX1800, DOT-3AL1800, DOT-3AX1800, DOT-3E1800, DOT-3T1800, DOT- 39 Ethylene (see notes 4 and 5) 32.5 DOT-3A2000, DOT-3AA2000, DOT-3AAX2000, DOT-3AL2000, DOT-3AX2000, DOT-3T2000, DOT-39 Ethylene (see notes 4 and 5) 35.5 DOT-3A2400, DOT-3AA2400, DOT-3AAX2400, DOT-3AL2400, DOT-3AX2400, DOT-3T2400, DOT-39 Hydrogen chloride 65 DOT-3, DOT-3A1800, DOT-3AA1800, DOT-3AAX1800, DOT-3AX1800, DOT-3E1800, DOT-3T1800 Hydrogen sulfide (see note 6) 62.5 DOT-3A480, DOT -3AA480, DOT-3AL480, DOT-3B480, DOT-3E1800, DOT- 4A480, DOT-4B480, DOT-4BA480, DOT-4BW480, DOT-26-480 Insecticide liquefied gas (see note 4 and 8) Not liquid full at 54 degrees C (130 degrees F) DOT-3A300, DOT-3AA300, DOT-3B300, DOT-3E1800, DOT- 4B300, DOT-4BA300, DOT-4BW300, DOT-9, DOT-40, DOT-41 Liquefied nonflammable gases, liquids other than those classified as flammable, corrosive, or poisonous, and mixtures or solutions thereof, charged with nitrogen, carbon dioxide or air (see notes 3 and 4) Not liquid full at 54 degrees C (130 degrees F) DOT specification cylinders identified in A6.5.1 and DOT- 3HT, DOT-4D, DOT-4DA, DOT- 4DS Methylacetylene-propadiene stabilized (see note 2) Not liquid full at 54 degrees C (130 degrees F) DOT-3A240, DOT-3AA240, DOT-3AL240, DOT-3B240, DOT-3E1800, DOT- 4, DOT-4B240, without brazed seams; DOT-4B240ET, DOT- 4BA240, without brazed seams; DOT-4BW240, DOT-4E240, DOT-41