TM 3-6665-329-13&P
This task covers:
Removal.
a.
Installation.
b.
INITIAL SETUP
Tools:
Electronic equipment tool
kit TK-105/G
Equipment Condition: Lid and panel assembly removed during troubleshooting.
Removal.
(1) Remove two nuts (1), and flatwasher (2).
(2) Remove two wires (3), and (4).
(3) Remove three nuts (5) Iockwashers (6) and screws (7).
(4) Remove ammeter (8) through front of panel assembly.
Installation.
b.
(1) Install ammeter (8) and secure with three screws (7), Iockwashers (6) and nut (5).
(2) Reconnect white wire labeled 121 (4) to positive (+) meter post, and secure with
flatwasher (2), and nut (1).
(3) Reconnect white wire labeled 122 (3) to other meter post and, secure with flatwasher (2), and nut (1).