TM 3-6665-329-13&P
(9) Lay panel assembly aside until needed.
(10) Push in and release three fasteners (16) and lower accessory shelf (17).
NOTE
Observe mounting location on accessory shelf of items being removed for easier installation.
Lay the following items aside until installed in new case.
(11) Unscrew screw (18) and remove gas-particulate filter assembly (19).
(12) Remove bellows and pump (20).
(13) Remove screw (21), washers (22), lock nut (23) and clamp (24).
(14) Remove four screws (25), Iockwashers (26), and filter holder (27),
(15) Remove four screws (28), washers (29), and mounting plate gage (30) with accessories.
(16) Remove one screw (31) and clip (32). Repeat for other clip.
3-48