ARMY TM 3-6665-329-13&P
AIR FORCE TO 11H2-18-1
This task covers:
Removal.
a.
Installation.
b.
INITIAL SETUP
Tools: Electronic equipment tool kits TK-105/G and TK-100/G
Materials/Parts: Technical Acetone (item 4, app D).
Removal. If required, remove residue of damaged identification plate (1) with pocket knife, and
a.
remove adhesive with Technical acetone (item 4, app D).
Installation.
b.
NOTE
Have test set laying with lid on top and handle facing you,
Inscribe test set serial number on new identification plate (1).
(1)
(2)
Remove protective backing from new identification plate (1).
Using brush, lightly apply Technical acetone (item 4, app D) to back of new identification plate.
(3)
Place identification plate on center of lid so nomenclature can be read from left to right or
(4)
place on center of cable storage door of front panel assembly below the "CABLE STORAGE
label.
Press identification plate firmly with heel of hand. Work edges down.
(5)
3-45
Change 2
