TM 3-6665-329-13&P
Table 3-2. Functional Test Procedures (Cont.)
Test
Procedure
Test
No.
Set test set METER SELECTOR switch to COMP
a.
Nuclear Compen-
2
VOLT position.
sating Circuit
Test
Open CABLE STORAGE compartment and remove
b.
CHASSIS TEST and DETECTOR POWER cables.
c.
ON CHASSIS TEST connector install a jumper
wire between pin 8 and Pin 14, and a jumper
wire between pin 1 and pin 7.
Install jumper wire on CHASSIS TEST con-
d.
nector pin 1 to DETECTOR POWER cable
connector pin B.
Power ON.
e.
f.
Move OFFSET INPUT switch to(+) position
and hold.
3-15
