TM 3-6665-329-13&P
b.
Connect power source to test set INPUT POWER connector.
NOTE
When you use a M10 Power Supply, refer to para 1, M10A1 Power Supply, para 2, and BA3517/U
Dry Battery go to para 3.
(1) M10 Power Supply.
(a) Make sure power switch (1) is in the OFF position,
(b) Connect either the 115 volt connector or the 220 volt connector to an AC power source.
(c) Connect detector power cable to set INPUT POWER connector (2).
WARNING
DISCONNECT THE M10 POWER SUPPLY FROM THE POWER SOURCE BEFORE REMOVING
THE CARTRIDGE FUSES TO PREVENT POSSIBLE DEATH OR SERIOUS INJURY TO
PERSONNEL.
(d) Set power switch (1) on Power Supply to agree with the AC power source used.
3-11
