2-192
TM 3-4230-209-30&P
2-44. FUEL HOSE ASSEMBLY AND FILLER OPENING CAP ASSEMBLY (CONT).
LOCATION/lTEM
ACTION
REMARKS
Fuel Hose Assembly/
Hose clamps (1)
Remove two hose clamps (1) by driving a flat bladed tool between the
The old style fuel hose assembly with an external solid
Nonmetallic hose (2)
buckle and the band, or by cutting off nonmetallic hose assembly (2)
wire may be used until the external solid wire breaks.
Rubber hose (3)
directly behind hose clamp (1).
At that time, the old pipe to hose straight adapter (8)
Quick disconnect
and rubber hose (3) will be discarded and replaced
coupling half (4)
Cut and remove the electrical tape holding nonmetallic hose (2) and rub-
with a wire reinforced hose eliminating the need for a
Pipe to hose straight
ber hose (3) together.
separate ground wire.
adapter (5)
Pipe to hose straight
Unscrew and remove quick disconnect coupling half (4). Pull pipe to hose
adapter (6)
straight adapter (5) out of nonmetallic hose (2), then pull nonmetallic
Plug assembly (7)
hose (2) off pipe to hose straight adapter (6). Unscrew and remove pipe to
Pipe to hose straight
hose straight adapter (6) from plug assembly (7).
adapter (8)
Quick disconnect
Unscrew and remove pipe to hose straight adapter (8) from plug assem-
coupling half (9)
bly (7) and remove with rubber hose (3) as an assembly. Unscrew and
remove quick disconnect coupling half (9) from pipe to hose straight
adapter (8).
