Pipe to hose straight adapter (8) is reusable if it is not
Remove pipe to two hose straight adapters (8) from rubber hose (3) as
damaged.
follows:
Step 7. Position shell in vise as shown (right). Unscrew and remove male
body (8).
Step 2. Reposition shell in vise as shown (below). Turn rubber hose (3)
clockwise to remove it from the shell.
Step 3. Repeat steps 1 and 2 to remove pipe to hose straight adapter (8)
from the other end of rubber hose (3). Discard damaged hose (3).
Filler Opening Cap Assembly/
Remove gasket (10), preformed packing (11), two screws (12), lock
Gasket (10)
washers (13), and grounding strip (14).
Preformed packing (11)
Screws (12)
Unscrew drain cock (15) and pipe elbow (16). If damaged,
Lock washers (13)
decal (17) from plug assembly (7).
Grounding strip (14)
Drain cock (15)
Pipe elbow (16)
Decal (17)
TM 3-4230-209-30&P
2-193