TM 3-4230-209-30&P
2-196
2-44. FUEL HOSE ASSEMBLY ANO FILLER OPENING CAP (CONT).
REMARKS
LOCATION/lTEM
ACTION
Fuel Hose Assembly/
Step 7
Place male body of pipe to hose straight adapter (11) into vise.
Push and turn shell and rubber hose (10) clockwise onto stem
until large threads engage.
Step 8 Change to a vertical position in the vise and tighten male body
into shell. Assemble another pipe to hose adapter (11) to other
end to complete the assembly. The completed assembly should
look like the illustration.
Step 9 Using a multimeter set to measure ohms, zero the meter. Touch
the test leads to both ends of the assembled rubber hose and
pipe to tube couplings. The multimeter should indicate near zero
ohms.
Step 70. Screw quick disconnect coupling half (12) on one end of com-
Quick disconnect coupling
pleted fuel return line (13) and tighten.
half (12)
Fuel return line (13)