TM 3-4230-209-30&P
2-188
2-43. ELECTRICAL WIRING.
This task covers:
c. Reassembly
a. Disassembly
b. Repair
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Wiring is removed from the water heater.
Automotive Maintenance and Repair Field Maintenance
Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31 )
Materials/Parts
Electrical leads (fig D-36 thru D-55)
REMARKS
ACTION
LOCATION/lTEM
Electrical Wiring/
Disassemble electrical leads (1 thru 20) listed in table on page 2-155 by
Electrical leads (1 thru 20)
cutting off any unserviceable lug terminals (21 ) except for electrical
Lug terminals (21)
lead (18) which has an electrical plug connector.
Disassemble electrical lead (18) using the following steps:
Screws (22)
Strap (23)
Step 1. Unscrew and remove two screws (22) and a strap (23) located on
Electrical connector
cable clamp (24)
electrical connector cable clamp (24).
Step 2. Unscrew and slide electrical connector cable clamp (24) and
Electrical conduit
adapter (25)
electrical conduit adapter (25) back on electrical wire (26).
Step 3. Unsolder electrical wire (26) from electrical plug connector (27)
Electrical wire (26)
Electrical plug
contact pin.
Step 4. If required, slide electrical conduit adapter (25) and electrical
connector (27)
connector cable clamp (24) off electrical wire (26).
Step 5. Cut off lug terminal (21) on the other end only if it is damaged.
