Outlet Hose Assembly/
Punch and holder (10)
Keeping the hose clamp (3) drawn tight, flip the punch and holder (10) on
the frame (7) and strike with hammer to mechanically lock the buckle (4)
to the strap of the hose clamp (3). While still holding the ratchet tension
wrench (9) tight, rock the strap band clamping tool back and forth. The
band will break flush with edge of the bend lock buckle (4).
Tap the broken end of the hose clamp (3) strap with a hammer to elimi-
nate any sharp edges. Do not hit the nut (6).
Gasket (11)
Install gasket (11).
Pipe nipple (12)
Wrap male threads of pipe nipple (12) with antiseizing tape and install into
one end of the hose assembly.
2-59
TM 3-4230-209-30&P