TM 10-5410-228-24
2.13.30 Power Panel Repair - Continued.
b. Assembly (Refer to Figure 2-52)
(1)
Secure dust and water seal boot (15) and circuit breaker (16) to power panel (4) with six screws
(13) and six new lockwashers (14) (Item 15, Appx E).
(2)
Connect wires to connector and install bushings on connector (12). Remove tags from wires.
(3)
Apply sealant (Item 47, Appx C) to flange of connector (12) and to screws (8). Secure connector
(12) to power panel (4) with four screws (8), four flat washers (9), four new lockwashers (10)
(Item 18, Appx E), and four nuts (11).
(4)
Install chemical sensor cable assembly (7) on power panel (4). Install protective cover (6) on
chemical sensor cable assembly (7).
(5)
Secure power panel (4) to exterior frame (5) with 30 screws (1), 30 new lockwashers (2) (Item 17,
LMS
5
11
10
7
9
16
23
1
7
O
P/
12
8
6
4
14
15-1-M
15
13
